A Simulation for Flavivirus Infection Decoy Responses

Abstract

In this work, we discuss the development of simulation code for a model of the cross-reactive adaptive immune response seen in flavivirus infections. The model specifically addresses flavivirus pathogen virulence in G0 vs Gcell states. The MHC-I upregulation of resting cells (G0 state) allows the T-cells generated for flavivirus peptide antigens to attack healthy cells also. The cells in Gstate are not upregulated as much and so virus hides in them and hence is propagated upon rupture. Hence, this type of model is referred to as a decoy model because the immune system is decoyed into preferentially recognizing the upregulated cells while the virus actively propagates in another small, but important, cell population. We show that the generic assumption of upregulation via a model which includes the G0/Gdifferential upregulation leads to immunopathological consequences. We outline the details behind the simulation code decisions and provide some theoretical justification for our model of collateral damage and upregulation.

Share and Cite:

Peterson, J. , Kesson, A. and King, N. (2015) A Simulation for Flavivirus Infection Decoy Responses. Advances in Microbiology, 5, 123-142. doi: 10.4236/aim.2015.52013.

1. West Nile Virus Infection Models

The family Flaviviridae are single-stranded, plus sense RNA viruses and, with the exception of hepatitis C virus, are all arboviruses, transmitted by mosquitoes and ticks. These viruses cause diseases that include dengue, yellow fever, as well as tick-borne, Japanese and West Nile virus encephalitis. Together these viruses have a

major global impact on human health. They are distributed worldwide with the exception of the polar regions, although a specific flavivirus may be geographically restricted. Notwithstanding, these viruses can expand their geographical distribution, with West Nile virus, for example, emerging in recent years North America, present- ing a significant threat to public and animal health. The most serious manifestation of West Nile virus (WNV) infection is fatal encephalitis in humans and horses, as well as in certain domestic and wild birds. The virus is generally maintained in a zoonotic transmission cycle involving mosquitoes and birds. Most individuals will usually experience an in apparent or mild febrile illness, others, a dengue-like illness, while a minority, in particular including the elderly and immunocompromised, may develop encephalitis which can be fatal. The diagnosis is usually made serologically, although the virus may be detected in the blood by molecular techniques, or in tissue culture. In general, humans are regarded as dead-end hosts since they do not generally produce a high enough viremia to enable transmission by mosquitoes. Currently, no vaccine is available and there is no specific antiviral therapy to modify disease outcomes.

Infection of the host by pathogenic viruses begins an interaction that involves evolutionarily co-developed and counter-developed pathways that confer advantage for both organism and host survival. Infection of cells results in the intracellular processing of virus proteins into peptide fragments that bind to nascent class I and II major histocompatibility complex molecules (MHC-I and II) that are displayed on the infected cell surface. This is additional to the normal processing of self-proteins into peptides that occurs in all cells as part of the main- tenance of tolerance to self. The combined MHC-virus peptide configuration forms the ligand that enables the recognition of infected cells by virus-specific cytotoxic T lymphocytes (CTL) by the cognate T cell receptor (TcR) expressed on the T cell surface. These CTL cause death of the infected cells by lysis, thereby substantially reducing production of progeny virus. This ultimately leads to eradication of virus from the host, enabling host survival (reviewed in [1] ). Flaviviruses such as the neurotropic viruses, West Nile (WNV), Murray Valley encephalitis, Kunjin and Japanese encephalitis viruses, induce an increase in expression of MHC-I and II, as well as other immune recognition molecules, including intracellular adhesion molecule-1 (ICAM-1, CD54), vascular adhesion molecule-1 (VCAM-1, CD106) and E-selectin (CD62E) variously and on a wide variety of cells [2] . WNV-induced increases in cell surface expression of these molecules therefore results in increased efficiency of recognition and killing of infected cells by WNV-specific CTL [3] [4] . Increases in MHC-I concentration on infected cells enable greater numbers of simultaneous TcR-MHC-I-peptide ligand interactions, which enhance the avidity of interaction of virus-specific CTL with the infected target cell. The increased avidity enables the interaction of infected cells with CTL clones that are previously below the recognition threshold by virtue of their low affinity for MHC-virus peptide ligand. Furthermore, a polyclonal anti-viral CTL population may also include low-affinity clones that are self-reactive, i.e., clones that recognize MHC-I-self peptide configurations [4] or even MHC without peptide specificity [5] . Due to the increased avidity of their interaction, these low-affinity, self-reactive clones can now lyse both infected and uninfected target cells that express high cell surface MHC-I concentrations [6] [7] . Furthermore, other non-specific accessory molecules, such as ICAM-1 expressed on the target cell, interacting with its integrin receptor, lymphocyte function- associated antigen-1 (LFA-1; CD11a/CD18), on the T cell, can also increase the avidity of T cell target cell interactions, thus additionally lowering the affinity threshold for T cell recognition and target cell lysis [8] . In addition, interferon- (IFN-) also strongly increases the expression of MHC and ICAM-1 on potential target cells in the vicinity, thereby increasing their susceptibility to CTL lysis [9] .

Because the avidity of interaction between T cells and their targets can be increased via MHC associated (i.e., MHC-I viral peptide and CD8 MHC-I) and non-MHC-associated (i.e., ICAM-1 LFA-1) interactions, any increases in MHC and/or ICAM-1 expression further enhances CTL recognition of target cells. This in turn increases the chances of low-affinity, self-reactive CTL recognizing these target cells. The position of the cell cycle is also important in flavivirus infection. Cells in G0 (resting) when infected with WNV increase their MHC-I expression 6-10-fold, while infected cycling cells (G1, S, G2 + M) increase MHC-I expression by only 2-3-fold [9] . This results in some 10-fold more lysis of infected G0 target cells than cycling cells by the same CTL [3] . Thus, there is enhanced avidity of interaction between CTL and WNV-infected cells in G0, which express relatively high levels of MHC-I, while infected cycling cells that express much lower levels of MHC-I are less easily recognized. Importantly, WNV replicates to a significantly higher titer in cycling cells than in G0 cells. Thus, virus may be eradicated with relatively poor efficiency in a population of infected cycling cells. In vivo, since most cells are in G0, we hypothesize that it is the small population of infected cycling cells that

support virus replication while maintaining a low immunological profile, thus increasing the probability of virus transmission [4] . As indicated above, the release of IFN- associated with T cell target cell interactions increases MHC and ICAM-1 expression on uninfected cells in the vicinity of virus-infected cells. Thus, high MHC-I expressing (uninfected) targets would be susceptible to lysis by low affinity self-reactive CTL clones. If virus-specific CTL populations included low-affinity self-reactive (i.e., crossreactive) CTL clones, which were able to lyse these uninfected cells, this would result in destruction of uninfected tissue. In the case of an encephalitic virus infection, this collateral damage to uninfected cells would increase the damage to the brain thereby increasing morbidity and mortality. In this way IFN- could be responsible for fatal immunopathology in WNV encephalitis in mice [10] .

This work builds a model of the host-pathogen interactions for flaviviruses in which we focus on WNV. We build a model as closely tied to the biological literature as possible with a mathematical framework and we show that the model exhibits immunopathology that we argue leads to host death in a small but troubling 3% - 8% of the Flavivirus-infected host population.

All modeling of this nature requires many compromises and many levels of abstraction. We model the infection within a single abstract host. We choose initial cell population sizes and immune system components so that our abstract version of a host exhibits reasonable responses closely aligned to what we find in the literature. It is not possible to discuss all of the many design decisions that go into such code development, so we only give some of the details here. The reader can go to [11] for the details for the simulation which is written in C++ and Qt.

Simple T Cell Interaction Algorithms

We begin with a modification of a model of T cell recognition first presented by [12] with changes to handle MHC-I upregulation. Receptors on a given T cell recognize a specific foreign protein snippet, a peptide bound to MHC-I we will call ligand c. This ligand binds to its cognate T cell receptor with high affinity. However, all T cell receptors are also exposed to a variety of possible self-peptide-MHC-I ligands which may bind although with measurably weaker affinity. For clarity, let’s treat these peptides as a single self peptide d complexed with MHC-I, which has a lower affinity for the virus specific T cell receptor. Hence, in an antiviral immune response, at the T cell recognition level there is always a danger of misrecognition in which the virus specific T cell receptor recognizes and responds to a ligand d instead of c. This leads to the possibility of immune-mediated destruction of uninfected cells in the host, i.e. immunopathology. Following [12] , we note the recognition process in T cell receptors includes several steps. Let denote the T cell receptor. Then the foreign peptide MHC-I ligand c and R collide at rate to form a complex in which the ligand is bound to the receptor. This receptor-ligand complex also disassociates at rate thereby unbinding the ligand c from the receptor R. This leads to the simple dynamics

where is the usual notation for concentration of a substance. At steady state,

we then have leading to where.

When the ligand binds to the T cell receptor, it triggers a signal transduction pathway inside the T cell which leads to activation of the T cell. Also, after ligand binding, the receptor undergoes a series of modifications such as phosphorylation at several sites. Let’s assume the T cell receptor transduction pathway has five phosphoryla- tion sites. The complex is now renamed where denotes a site not presently phosphorylated. Phosphorylation can then create complexes of the form (one site is phosphorylated), (two sites) and so forth to (all sites phosphorylated). Each of these modifications are reversible to the original complex. Transduction of the T cell signal is not triggered until all the modifications have been made. Hence, this introduces a delay between the ligand binding and the T cell signal generation. This suggests only the ligands that stay bound to the T cell receptor long enough to it to become fully phosphorylated can activate the T cell.

From our discussions above, we see the probability that remains bound for a time after binding is

related to the off rate. Hence, letting denote this probability, we have. Signaling only occurs

after a delay of seconds after the complex forms. Therefore, the probability per ligand that the T cell is activated is the same as the probability the ligand stays bound longer than seconds. Thus, the rate of T cell activation in the presence of a concentration of the viral peptide MHC-I T cell receptor complex is

. And the self peptide gives rise to a rate of T cell activation. where we assume

is the same for both. The viral ligand dissociates from the receptor at a slower rate than the self ligand

due to its stronger bond with the receptor. Thus,. We see the viral ligand spends more time bound

to the receptor than the self one. The error rate for recognition is thus. The literature

suggests a typical and with. Hence,. Therefore,

long delays can enhance the fidelity of the recognition process. As Alon states, this enhancement comes at a cost: a long signal transduction delay implies that more of the viral ligands can dissociate from the T cell receptor before T cell signaling is triggered, leading to a loss of sensitivity. So loss of sensitivity is acceptable because of the improved specificity, i.e. the discrimination between viral and self ligand recognition.

Now, add the WNV to this model of recognition. What changes with upregulation of the number of MHC-I peptide ligands on the surface of the infected cells? As parameters of affinity of the ligand-receptor interaction, we assume that, and are intrinsic and not altered by the the MHC-I upregulation caused by the WNV infection. As production of anti-viral interferon by infected cells will also increase MHC-I expression on uninfected cells in the local vicinity, we will assume that if the MHC-I peptide ligands are upregulated by a factor, then the new error rate is scaled by the same factor; i.e., if the upregulation factor is, we

have. Hence, if upregulation is approximately 6 - 10 fold, we see

which allows for a significant recognition of self ligands and consequent signal transduction leading to an increase in collateral uninfected cell damage. In other words, is a measure of the avidity of the T cell-target cell interaction, which is a function of MHC-I peptide ligands expressed on the cell surface. We therefore have theoretical reasons to suspect that WNV infections can lead to healthy cell loss.

2. One Host Flavivirus Models

The model is based on a theoretical decoy model of [13] , which simulates the cellular adaptive immune response to flavivirus in vivo. In ( [13] and [14] ), it was argued that natural killer cells did not aid in the recovery of a host from a flavivirus infection. Hence, to investigate this interaction most simply, we choose to model only an adaptive immune response. We now describe the model in detail and justifying the assumptions necessary for its implementation.

The main variables we use are listed in Table 1(a). The cells labeled FIC0 are infected resting cells and those labeled FIC1 are infected and actively dividing,. The virus level is a measure of viral load in real data in plaque-forming units (pfu) per cell but its exact definition is not important to the simulation. We initialize the healthy cell populations in our simulations to million healthy cells. We could initialize for larger or smaller populations but this is concrete enough to make our points. It is not possible to keep track of detailed information on such a large number of healthy cells individually. Instead, we model our simulation universe as a cube which is 216 on a side. As is common in many simulations, we use a number of auxiliary class objects. In the simulation, addresses of each cell range from 0 to approximately 10 million. These integer addresses correspond to addresses in a box of size. This box is then divided into cubes with an edge size of 27 which gives 512 cubes. Each cell is located in one of these cubes, where. Hence, we have several different cell addressing choices.

1) A cell has an address which is an integer from 0 to. This address can also be expressed as a triple which corresponds to its location in space.

2) A cell lives in a cube whose address is with, and in the range 0 to 7. These

addresses are determined by the rewriting as, and where, and are the integer remainders.

3) Inside the cube, the remainders give the the local cell address.

(a) (b)

Table 1. Variables and probabilities. (a) Variables, (b) Probabilities.

The basic rates and probabilities we use are listed in Table 1(b) and Table 2(a). The nominal values do change with different simulation needs, but they are listed to give a base from which we will diverge as necessary. New viruses are added to the virus population due to lysis of FIC0 and FIC1 cells. In our model, changes at each iteration and the other probabilities are set randomly around the base values given in Table 1(b). There are also some additional parameters as shown in the bottom panel of the table. The use of these parameters, rates and probabilities are discussed in the following sections.

2.1. Infected Cell Modeling

For dividing infected cells, our model also uses IFN- and ICAM-1 upregulation. Upon recognition of their cognate ligand, MHC-I-peptide, by the T cell receptor (TcR), cytotoxic T cells secrete IFN- which upregu- lates the cell surface concentration of MHC-I peptide ligand on the infected cell surface. Thus, MHC-I-peptide upregulation is induced by both the WNV infection and IFN-. As an accessory adhesion molecule in T cell- target cell interactions, upregulation of ICAM-1 further increases the avidity of the interaction between the TcR and the cognate MHC-I-peptide-ligand. ICAM-1 is also upregulated by IFN-. When an infected cell is re- cognized and killed by a T cell, the IFN- secreted by the T cell upregulates the cell surface concentration of both MHC-I and ICAM-1 on all infected and uninfected cells in a neighborhood of the recognized killed cell. We keep track of this changing upregulation level for the infected cell with the variable.

We could handle the neighborhood upregulation of MHC-I simply. Each upregulated cell belongs to a coarse

(a) (b)

Table 2. More probabilities and parameters and a sample upregulation strategy. (a) More probabilities and parameters; (b) A sample upregulation strategy.

cell. We could then upregulate all infected cells that belong to this coarse cell. The difference between the number of infected cells found in a coarse cell and the total number in the coarse cell, , then gives us an estimate of how many uninfected cells have also been upregulated. This upregulation of cell surface MHC-I and ICAM-I concentration increases the probability that an infected cell will be recognized and killed. Unrecognized infected cells continue to move towards a lytic event which releases progeny viruses into the coarse cell. We model the expression of MHC-I-peptide ligands on the surface of an infected cell as follows. Living cells display MHC-I molecules that bind short peptides within a groove. Together these form a ligand recognized by the TcR. These peptides are derived from both self and non-self proteins.

As a modeling strategy, we make the assumption that there are peptides that are viral non-self peptides. The model can use any of course, but it is easier to see the thread of our argument with a specific power. This number has been chosen because it is a power of 2 and hence has some advantages in simulations and it was large enough to be pertinent. The self-peptide pool in reality is very large. We will let the self-peptide pool be of the same size as the non-self pool, i.e., 8192. To model peptides, we will number them from 0 to (in general, and divide them in half: viral peptides are labeled from 0 to 8191 and self, from 8192 to 16383. We know that a cell has many MHC-I-peptide ligands on its surface, but we do not want to model all of them. We assume that in a given unit cell surface area, there are MHC-I-peptide ligands re- cognizable by the TcR, if not upregulated, and a multiple of these if there is upregulation of the MHC-I molecule on the cell surface. Thus, if the upregulation factor is, then the upregulated cell would have ligands. In a WNV-infected cell without upregulation, we will assume that the ligands per unit area pre- sented on the cell surface consist of self peptides and WNV peptide. Then, if an infected cell is upregu- lated by a factor of, the cell would present self peptides and WNV peptides. For example if the upregulation factor is, we would see self peptides and WNV peptides per unit area on the infected cell. The non-upregulated () cells are handled in a similar fashion except that instead of displayed ligands each time step, we only use. One of them is considered viral and the other three are self. Hence, for an upregulation factor of, the vector in has the form shown in Table 2(b) for resting infected cells and dividing infected cells. We would have similar data for upregulation factors other than, of course.

We create new FIC0 cells as needed by calling the method SetFIC0() which is discussed in [11] . When we create a new FIC0 cell, we assign it to a randomly chosen coarse cube. We create this coarse cube address by randomly choosing integers, and in the range to (see the cell address discussion earlier). We maintain a list of FIC0 and FIC1 cells throughout our simulations and each such cell has the data vector associated with it, which has the components shown in Table 3(a).

Here and are as previously described. The variable is a counter which is increased for each time unit the infected cell is alive. Once exceeds the allowable life time of a typical infected cell, the cell is removed from the simulation. The vector contains integers where is the amount of upregulation the infected cell has had. For example, if the upregulation level is, then the vector would be size. The integers refer to the proteins in our simulation which are expressed on the surface of the cell and are therefore available for recognition, as described earlier. Finally, the variables and are the infected cell’s avidity and upregulation state, respectively. We will discuss how these variables are updated next. Our coding decisions and implementation strategies and choices for these matters are discussed fully in [11] .

(a) (b)

Table 3. Components of and the coefficient of variation,. (a) Components of; (b) The coefficient of variation.

2.2. Infected Data Updates

Our model uses both IFN- and ICAM-1 upregulation. IFN- is secreted by cytotoxic T cells upon recogni- tion of their cognate ligand; this upregulates both MHC-I peptide ligand and ICAM-1 on the cell surface. MHC-I and ICAM-1 upregulation are also induced by WNV infection. We discuss the reasoning behind our model of the upregulation issue later in Section 4. This section explains our strategy for IFN- upregulation as well as the killing of uninfected cells that are susceptible to lysis by low affinity anti-viral T cells as argued by the decoy hypothesis [13] . We will refer to such uninfected cell deaths as collateral damage.

At each time point in the simulation, new infected cell’s are created and added to the FIC0 or FIC1 list. For these newly created infected cells, we initialize their age and recognition value to; and set their initial IFN- value to. Hence, as the simulation runs, there is a pool of previously created infected cells and infected cells newly created at this time. As soon as an infected cell is created, we calculate its avidity for the T cells which will interact with it at this time. Once the avidity is calculated, we multiply it by the current IFN- value of the cell (recall it is at this time). Once a cell is infected, we assume there is a time lag before there is ICAM-I upregulation due to the infection. This time delay is set by the variable ICAMThreshold in the simulation code. Currently, this is set to be time steps and since a time step corresponds to minutes, we see ICAM-I is not upregulated until after hours. This is the only time in the simulation that ICAM-I upregulation is used.

Hence, at each time in the simulation, we have lists of infected cells whose avidities are known. Infected cells start with their intrinsic avidity which is determined by their displayed MHC-I complexes and the particular mix of T cells that are present to interact with them. Each of these cells also has a life time which is updated each simulation step. However, after these computations are done, we then determine how many of these infected cells are to be recognized and lysed or who have lived long enough to rupture. Hence, there are two events: one is the infected cell recognition which initiates IFN- upregulation which enhances any infected cells avidity which can receive the IFN- signal released by the recognized cell and two: the infected cell death event which does not release IFN- but does release progeny virus. We keep track of the coarse addresses of the cells targeted for recognition and removal and we increase the avidity of these cells by the IFN- multiplier. We do this up to a maximum multiplier amount which is set by the simulation. Then, at each subsequent simulation step, we check to see if this enhanced avidity exceeds the value needed for recognition. Thus, at each time step, the infected cells removed are any cells whose avidity (newly created or enhanced) allows recognition. Hence, the value of an infected cell’s recognition value increases over the life of the simulation as upregulation of ligand and ICAM-1 spreads through the neighborhood cells.

We need to look at the details of how we compute the avidity of an infected cell. However, first we will discuss T Cell modeling.

3. T Cell Initialization Code

In this simulation, we create a population of T Cells which can kill WNV-infected cells and if the decoy model is correct, uninfected cells as well. The function we use to do this in is Create T Cells (). The target cell population is divided into big cubes for convenience. At each time step in the simulation, new target cells are infected. New FIC0 (infected, not dividing) and FIC1 (infected, dividing) cells are created.

At the time they are created, we calculate the avidity of the T cell-target cell interaction according to the following model. In the simulation, there are West Nile Virus (WNV) peptides that can be placed in MHC-I grooves. The T Cells that can kill an infected cell are then modeled using a distribution of TcR affinities. Each of the T Cells has its highest affinity for one of the MHC-I-WNV peptide ligands. The affinity calculation for each TcR-ligand interaction is essentially a normal distribution. There are points in the bell curve with the one at the center corresponding to the maximum affinity for given MHC-I-WNV peptide ligand. That leaves to the right of the center and to the left each with progressively decreasing affinity. This number is a simulation parameter. These other affinity values then must correspond to how the TcR interacts with a cell via the MHC-I-peptide ligand. To each of these points, we associate self peptides (the ones numbered above). At the start of each simulation, we pick these peptides randomly. This gives TCRs which have the potential to interact with MHC-I-self peptide ligands (lower affinity than the center one) and the one WNV peptide. At each time step, we choose to compute the FIC0 or FIC1 affinity/avidity using a fraction of the full T Cell capability. Thus, instead of calculating the affinity using all affinity calculations for each self peptide in the pool, at each time step, we choose a fraction (now 45%), of these, approximately. Thus, we randomly pick numbers from to. For example, if one of these numbers is, we think of as and so the number corresponds to the WNV- peptide and the self-peptide. The number would then be corresponding to WNV pep- tide and self peptide. So this collection of numbers gives us a mix of T Cells (TcR) correspond- ing to the WNV-peptides we selected as well as the other numbers which correspond to the self-peptides.

We assume the avidity of a T Cell to bind to a WNV-infected cell via MHC-I-peptide ligand depends on the amount of MHC-I and other surface molecule upregulation. If we label this upregulation factor as, we assign

the affinity of peptide using a normal distribution to be. The parameter determines the

coefficient of variation of this bell curve. The coefficient of variation, , is the width across the bell curve

corresponding to an ordinate value of 0.5; this is given by the formula. We want the

curve representing the affinity of T Cells which recognize MHC-I-peptide ligand to be very narrow with no upregulation of ligand on the target cells () and to widen as increases up to our maximum value of. We achieve this by choosing the values as shown in Table 3(b). The third column in the table shows how the coefficient of variation of the curves varies with the value of. This behavior is illustrated in Figure 1 where the circles on each of these plots represent the values from (the affinity of the TcR for MHC-I-WNV-peptide) to, showing the decrease in affinity as it moves away from the center where there is the maximum of 1. In the actual code, we adjust these values so that they scatter randomly around the center value and we also use where is a random perturbation of. Note that for small values of, the generated affinities are quite small for. We can easily adjust this affinity model to make the affinity curves much narrower. We can therefore adjust the affinities we use in our avidity calculations so that they depend on the upregulation factor. The simulation would typically generate such as these for an MHC-I upregulation factor of: WNV-Peptide T Cell would have; WNV-Peptide T Cell, and so forth. Note all of these are slight perturbations from the base value of shown in Table 3(b) which is the base for a MHC-I upregulation of. Then, we compute the actual affinities we will assign to each self-peptide.

Infected Cell Avidity Calculations

Now let’s look at a typical infected cell of class FIC0. If the WNV MHC mediated upregulation is fold, in our model, this FIC0 cell has MHC-I grooves that hold populations of peptides that are comprised propor- tionately from self peptides and WNV peptides. These peptides are chosen randomly from the WNV and self pool, as before. Now at each time point, we use of the T Cells created according to the scheme discussed above. It seems reasonable to model in this way as we get a random selection of a large population of

Figure 1. The T Cell affinities vary with the amount of MHC-I upregulation.

T Cells with a range of affinities interacting at each time point. For example, at a given time point, the T Cells we pick could be as follows: the first WNV peptide is and associated with it are the self peptides. We have now selected of the T Cells. The second WNV peptide is and we select of its self peptides. We have thus selected of the possibilities. Then the third WNV peptide is and for it we select of its self peptides giving a total of so far. We finish by selecting WNV peptides and of its self peptides giving total and WNV peptide and of its self peptides to finish out the. In a sense, we have selected peptides to match with the peptides on the surface of the FIC0 cell. We can either think of this as separate T Cells or as T Cells (one for each WNV peptide) with a range of affinities. The T Cells are assembled from these randomly selected numbers. When these numbers are randomly chosen, we do not allow for the same number to be chosen twice. The chances of having the same WNV peptide in a T Cell are small and so we have set up the simulation model to make sure we can not get matches in the random selection process.

We can therefore think of these T Cells as having a response to peptides other than the WNV peptide; we can assemble a T Cell with highest affinity for WNV peptide whose recognition can also include as many as self peptides. Thus, the model we use can create as many T Cells as there are ways to take peptides out of a set of. For example, if the numbers randomly created included, , and, this would correspond to a T Cell whose WNV peptide is the third one and whose associated self peptides are the ones stored as self peptide, , and. That T Cell would then be used in the affinity computations at that time step.

To calculate the avidity of these T Cell interactions with this FIC0 cell, we find out which of the self and WNV peptides expressed on the surface of this FIC0 cell are recognized. We then sum over all of the affinities that result from the matches. If this sum is or more, this FIC0 cell will be targeted for lysis at the next time step. This recognition will then trigger the IFN- upregulation and the ICAM-1 upregulation on the remaining target cells. This is done simply. The original avidity is multiplied by appropriate multipliers (say for IFN- and for ICAM-1 upregulation, respectively) to obtain the new avidity. We do this calcula- tion for all the infected FIC0 cells, maintaining them in a list. We add them when they are created and delete them upon T Cell recognition and lysis or upon removal because they have exceeded their lifetime limit.

Our process begins by noting out how many active T Cells and infected cells there already are. Then we find the number of new FIC0 cells that have been created, which indicates where to start the affinity calculations. The previous FIC0 cells in the list have already had their affinity computed. We are now at the place in the list where we need to calculate the affinity for our newly infected cell. To calculate the affinity, we look at the peptides associated with the infected cell and, for the infected cell, we also store their lifetime and IFN- upregulation factor. We have already chosen random T Cells. Each of these corresponds to an integer

which can be written as. Each active T Cell, , therefore has an associated peptide and

affinity where is the WNV peptide number and is the number of the self-peptide. To indicate the dependence on the number, we will also add a superscript. Hence, the active T Cell, , has an asso-

ciated peptide and affinity. Then, for each peptide, , on the surface of the infected cell, we check if it matches a peptide that can be recognized by the TcR and add its associated affinity. Let denote

the check if V is the same peptide as W and, otherwise. If we let denote the

infected cells avidity, we then have. The active T Cells at this time step are

a mix of the WNV peptides, so the value of could be larger than indicating a recognition event. Then, we multiply by the IFN- multiplier factor, making sure we don’t exceed the maximum IFN-

upregulation, , allowed:. We also allow for ICAM-1 upregulation if the cell has

been infected long enough. If the current life of the infected cell exceeds the ICAM threshold time, , we reset

again by multiplying by the ICAM-1 upregulation factor,. Of course, if this value exceeds the maxi-

mum ICAM-1 upregulation amount, , we set to be:.

4. Handling Collateral Damage

To find the avidity of the uninfected cells in each cube (the approximately or so), we randomly assign the self peptides for an uninfected cell and using the full T Cell affinity possibilities, we compute the avidity. To do this, we assume the T Cells are spread uniformly through the cubes and since there are so many uninfected cells compared to infected in general, it would made sense to think all these T Cells could interact with the uninfected cells. When we model an infection, at each time step in a given simulation, we need to estimate collateral damage. We do this by developing an estimate of how much collateral damage occurs during an infection assuming a certain level of upregulation. This estimate is done before we perform any infection simulations. We build these estimates for the upregulation levels from to at least times. The estimates are then averaged over the number of collateral damage computations we have done to provide the collateral damage amounts we use in any of our infection simulations. A typical collateral damage calculation is done as follows. In each cube, we

・ choose the self peptides for each of these cells randomly from the self peptide pool.

・ for these cells, compute their avidities for the T Cells with all their self peptides. We will assume that each uninfected cell expresses a certain number of self peptides on its surface. This number is arbitrary, but clearly, if the entire universe of self peptides were on the cell, then all uninfected cells would be recognized and potentially lysed. We will assume each uninfected cell expresses or randomly chosen self peptides on their surface which is a small fraction from the self-peptide universe of choices. Our rational for this is as follows. In any cell, peptide snippets are taken from all self-proteins, processed by molecular machinery, placed in MHC-1 cradles and the resulting complex is transported to the cell’s surface. There are a huge number of self-proteins and a limited number of MHC-1 molecules. Hence, at any given moment, a cell displays some fraction of the possible universe of self-peptides as well as a portion of the possible foreign peptides. In addition, MHC-1 molecules are constantly being recycled into component parts for reuse and new MHC-1 molecules with new self-peptides installed in their antigen presenting grooves are being generated. Thus, we can assume only a fraction of the possible self-peptides are displayed at any time and the members of this fraction are probably constantly changing. The immune system generated T Cells that can recognize self-proteins then interact with this fraction of displayed self-peptides generating an affinity. In a typical human, the self-peptide universe is probably on the order of and of this is displayed self-peptides, which is a reasonable approximation to what we would find in a typical cell. Since our universe size is, this amounts to displaying the fraction of the self-peptide universe; approximately of the self-peptides. In our affinity calculations here, therefore we assume each uninfected cell expresses or randomly chosen self peptides on their surface.

We also know only a fraction of potential T Cells interact with any given uninfected cell at a particular time. Hence, choosing a small number of self peptides to be expressed on each of our uninfected cells and then allowing our T Cell interaction to determine avidity is essentially a more quantitative version of a simple probabilistic law. Such a law might have the form of assuming a certain percentage of uninfected cells are recognized at each time step. However, it is then harder to handle IFN- mediated upregulation. Also here, we don’t use the 45% fraction chosen randomly at each time step. Instead we do the affinity calculation using the full range of T Cells. This gives us avidities for each cell in the cube; i.e. avidities.

Note it is not clear how we should model these avidities. If we simply sum the affinities, it is quite possible that we would have avidities that exceed or more for a given cell. If the killing threshold is set to, this could generate an excessive number of uninfected cell deaths. We will divide our summed affinities by to make it harder to reach the killing threshold. In essence, this is a statistical approach to the calculated avidity. In our calculations, we choose this last approach for our calculated avidities. Our models assume WNV pep- tides and hence, we divide all the computed avidities by 5 to generate the avidity of each cell in the cube.

・ assume when a FIC0 or FIC1 cell is killed, there is IFN- mediated upregulation of these cells to some degree. We have the maximum IFN- upregulation set, so if the IFN- multiplier is set to, then after upregulations, is approximately. Hence, after upregulations, the upregulation approaches its maximum value and upregulation of these cells stops. Since we are using the full universe of of available T Cells, if an uninfected cell reaches maximum IFN- mediated upregulation without being lysed, this cell is no longer able to be destroyed by the immune system’s response. The cell will then live out its normal life and be removed following normal cellular metabolic rules. Hence, maximally upregulated cells die y natural causes since the computed avidity for these cells implies they have not been recognized by any of the T Cells.

・ next, go through the avidities just calculated and count how many have a high enough avidity to be killed as they are. Call this number because there is no upregulation yet. Then, go through the re- maining avidities just calculated and count how many have a high enough avidity to be killed with their avidities multiplied by. Subtract the previous number and call this number. This gives the number of additional cells killed after upregulation. We then continue this process: go through the re- maining avidities and count how many have a high enough avidity to be killed with their avidities multiplied by. Subtract the previous numbers and and call this number. This gives the number of additional cells killed after upregulations. We keep doing this until you have performed upregulations which approximates maximal upregulation. When complete, for each cube we now have the numbers, through.

・ now in any infection simulation, we model uninfected cell collateral damage in the following way. At each time step in an infection simulation, we know FIC0 and FIC1 cells are killed and their recognition by T Cells generates IFN- mediated upregulation signals to the cube they belong to. It takes several time steps, but eventually, enough upregulation signals occur within a given cube so that cells are being killed each time step. This gives us a way to count collateral damage somewhat quantitatively. Note we are assuming, consistent with the acute phase of infection, the upregulation signal is a one way action: there is no mechanism by which this can be down regulated in this model.

The Coarse Update Model

We will assume that our simulation model maintains its level of uninfected cells indefinitely in the absence of infection using a standard logistics growth model. Recall denotes the uninfected cell level in our model.

Hence, we assume the uninfected cells follow a logistics growth law: where the

initial condition is less than the resource allocation. For us, we want to maintain the level

. This means the uninfected cells grow at the rate, , with decay

proportional to the square of their population. If the growth rate of the cell population is on

the order of 1%, we would expect. Hence, a good choice for is.

We set these values in the simulation as and. Note, in discrete form the logistics growth law

gives. Even if the infection has reduced the uninfected cell population to a

fraction of the initial level, say, the update we see at the next time is

Hence, about cells are created at this time step even though the population is very far below the steady state level of. The typical biological response to such a depressed cell level would be relatively small and we want the simulation parameters to be chosen to preserve that level of response.

We estimate collateral damage as follows:

denotes the number of new infections. In the simulation, we keep track of the number of new FIC0 removals () and the number of new FIC1 removals () in the cube. We then compute the fraction

where is the current total number of infected cells. The value of is set to if

this calculation exceeds. This fraction allows us to estimate what the fraction of cells in a cube are likely to be infected at this time step.

・ at each time step, we keep track of the number of upregulation signals sent to each coarse cube and store this value in the variable where is the coarse cube number. Letting denote the number of cells in a coarse cube and we see the fraction estimates how much upregulation (and hence collateral damage) is being done in a given coarse cube.

・ we have stored the average values for each cube for each possible upregulation value. Denote these

values by where is the upregulation level and is the index of the coarse cube. We randomly

perturb the values around their base values to allow for variation. If we denote this perturbation by

we have the updated value.

・ we now have the number

This estimates the collateral damage in the coarse cube.

・ we allow for the possibility that there can be a multiplier effect. The number is the collateral damage

estimate for each cell in the cube. Each cell in a cube which is infected sends out upregulation signals which effect additional uninfected cells. This multiplier is the parameter. For example, if, we allow for an eight fold multiplier effect. Hence, the full collateral damage estimate for cube is

・ we then sum over all cubes to get the full collateral damage estimate,.

5. The Dynamics of the Model

To analyze the dynamics of the model we are building, we will need some auxiliary variables and constants which are listed in Table 4(a) and Table 4(b). In Table 4(b), the variable name IFN_gamma_neighborhood is replaced by IFN_gam_nbhd and ActiveTcellPercentage becomes ActiveTcellPer to make the table less wide.

There are also a number of nonlinear functions which compute various things about the variables and their interactions. These functions are listed below with their mathematical function names as well as the names they have been given in the code we use for the simulation.

SetFIC0 (): The variable denotes the new FIC0 cells. Let the number of these new cells be. This function picks random peptides to populate the MHC complexes of new FIC0 cells created at this current time step.

SetFIC1 (): The variable denotes the new FIC1 cells. Let the number of these new cells be. This function picks random peptides to populate the MHC complexes of new FIC1 cells created at this current time step.

ChooseRandomSubset (M,N): This chooses unique elements from a list of things (i.e. there are no repeats).

CalculateFIC0Avidities (): This computes the affinities for FIC0 cells given an FIC0 population.

CalculateFIC1Avidities (): This computes the affinities for FIC1 cells given an FIC1 population.

UpdateL: We update the lifetimes of the cells in the FIC0 list.

UpdateL: We update the lifetimes of the cells in the FIC1 list.

RemoveFIC0Cells (z): Here, we determine which FIC0 cells in the list have gone past their lifetime and so lyse as well as how many are recognized.

RemoveFIC1Cells (w): Here, we determine which FIC1 cells in the list have gone past their lifetime and so lyse as well as how many are recognized.

UpregulateIFN: This function IFN- upregulates all infected cells in a certain neighborhood of a recognized cell given the current list of cells, , to upregulate. It returns an estimate of the number of healthy cells so upregulated.

UpregulateIFN: This function IFN- upregulates all infected cells in a certain neighborhood of a recognized cell given the current list of cells, , to upregulate. It returns an estimate of the number of healthy cells so upregulated.

The Time Evolution of the Model

We now discuss the simulation dynamics. In what follows, we will use subscripts to denote the values of variables at the next time step and to indicate the value at the current time step. We show the update equations in the table below which are calculated in the order shown. The simulation first must initialize all the T cells we use.

(a) (b)

Table 4. Auxiliary and additional variables. (a) Auxiliary, (b) Additional variables.

・ Free virus, , is removed by the immune system with a certain probability, and virus is added to the pool by the lysis of FIC0 and FIC1 cells. We assume that FIC1 cell lysis contributes times as much as the lysis of FIC0 cells. From experimental data, , so if free antigen was contributed by the FIC0 lysis, then would be added by the lysis of FIC1. Thus, the amount of free virus is modeled by new free virus old free virus (virus released due to FIC0 cell lysis) (virus released due to FIC1 cell lysis) (virus removed by immune system prior to infection). This is modeled mathema- tically by which is Equation (1).

(1)

・ Uninfected Cell infections, , are handled next. We set new uninfected cell HC infections (Pro- bability of uninfected cell infection) old amount of virus present, or, Equation (2).

・ Infected cells which are not dividing, are the FIC0 cells,. We model their dynamics as new FIC0 cells at the next time step a percentage of new infections, , Equation (3).

(2)

(3)

・ Infected cells which are dividing are the FIC1 type,. Their dynamics are modeled as new FIC1 cells at next time step percentage of new infections or in mathematical terms which is Equation (4).

・ The number of FIC0 cells, , is given by total FIC0 cells at next time step old FIC0 cells new

FIC0 cells, , which is Equation (5).

(4)

(5)

・ The number of FIC1 cells, , at the next time is then total FIC1 cells at next time step old FIC1

cells new FIC1 cells or more quantitatively, , Equation (6).

(6)

For newly created cells of type FIC0 and FIC1, we assign the MHC-I-peptide ligands that are expressed on their surface by a call to the functions SetFIC0, , and SetFIC1,. In the code, this is done via the function calls SetFIC0(y) and SetFIC1(y). The functions and are used to determine randomly the proteins expressed on the surface of an infected cell as discussed in Section 2.1. As long as there are new FIC1 cells, , we build the peptides bound to the MHC-I molecules on the surface. These are infected cells and so they are less likely to be recognized and lysed by T cells, since the MHC-I is upregulated to a lesser extent on these cells. Hence, the call to builds data vectors of the appropriate size for FIC0

cells. We express this mathematically as (Equation (7)).

(7)

The call to builds vectors of size appropriate for FIC1 cells, , which is listed as Equation (8). The new vectors above are then added to the current list of FIC0 and FIC1 cells as data. Then, we choose a random subset of the WNV-specific T cells to recognize and lyse the infected cells. Recall at each time step we assume there is a heterogeneous population of T cells which can recognize a fraction of the possible peptide ligands. We designate these as active. In our simulation, we let 45% be active at each time step. We store the peptides that can be recognized in the ActiveTcellsIndex and use these peptides to

compute affinities. The function chooses indices out of the possible list to use as

the peptides for which the T cells generated at this time step have an affinity,. This can be expressed

quantitatively as which is Equation (9).

(8)

(9)

We then calculate affinities for the FIC0 and FIC1 lists. In the simulations, these lists can easily reach in size, so traversal of these data structures has a serious impact on computational time. So we need to determine the avidity of each new active FIC0 cell clone for each new FIC0 cell. We do this with the Calculate FIC0 Avidities function, labeled. Previous avidities are already stored in our FIC0 data structures. We add the new avidities to the list with the call Calculate FIC0 Avidities (y). Any of the newly infected cells whose avidity exceeds the threshold value that triggers T cell destruction is counted in the variable

new_FIC0_kills. This is stated mathematically as which is Equation (10). We then

do the same sort of thing for new FIC1 cells where the Calculate FIC1 Avidities function is labeled. In the call to Calculate FIC1 Avidities, we also count the number of newly infected cells that are killed and store this value in the variable new_FIC1_kills. The resulting equation has the mathematical form

Equation (11). In these equations the argument is the value of the new

FIC0 cells and is new value of the FIC1 cells.

(10)

(11)

The avidity calculations are implemented as previously discussed in Section 3.1. Infected cells whose avidity values enable recognition will then generate IFN- which will mediate MHC-I upregulation. We first remove the FIC0 cells and then the FIC1 cells. To remove the FIC0 cells, we

・ get the current size of the FIC0 list of cells.

・ update the lifetime values of each cell in this list.

・ we remove FIC0 cells whose lifetime has been exceeded.

・ we remove FIC0 cells whose avidity values trigger T Cell destruction.

・ Since is the number of FIC0 cells, each removal and kill, decreases.

・ cells dying in the absence of T cell recognition release their viral contents and increase the value of. The amount of free antigen so generated is determined by a random perturbation around the base value multiplied by the number of dying cells. The resulting amount of free antigen is stored in.

・ On the other hand, the antigen in the cells destroyed by T Cells is lost and does not increase the value. However, each destroyed cell has an associated coarse cube address which we keep track of in a list. Some of the cells in this cube will undergo IFN- mediated upregulation. We keep track of the number of T Cell mediated lytic events in this time step in.

Essentially, we repeat these steps when we remove FIC1 cells. Thus, the FIC0 and FIC1 removal algorithm first sets the elapsed time on all infected cells and an infected cell will die automatically if its life time is

exceeded. This is just a matter of incrementing the life value in each cell in and. This

amounts to a traversal through each list. The simple functions that do this are called which

returns, the updated list of FIC0 lifetime values. This is written mathematically as

and is shown as Equation (12). The similar equation, for

the updated list of FIC1 lifetime values is listed as Equation (13) where is the function which

does the lifetime updating for the FIC1 list.

(12)

(13)

As part of this list traversal, recognized infected cells are lysed by a call to the functions (this computes, resets and sets the portion due to FIC0 cells) and (this computes, resets and adds the due to FIC1 cells). We let denote the number of FIC0 cells which have exceeded their lifetimes and hence, undergo lysis without T Cell recognition and add released antigen to. We let be the number of FIC0 cells which are recognized by the immune system and killed (Equation D14).

(14)

Similarly, the number of FIC1 cells exceeding their lifetimes or recognized by the immune system and killed are denoted by and, respectively (Equation D16).

(15)

We then need to upregulate IFN- in a selection of addresses around each FIC0 cell lysed by a T cell. The address in the data for each FIC0 cell that has been lysed by a T cell belongs to a corresponding coarse cell in the immune model,. We handle the IFN- in the method Set Neighborhoods as follows:

・ the cube addresses associated with destroyed FIC0 and FIC1 cells are stored in a vector which we convert into a list.

・ the list of cube addresses which contain a destroyed infected cell is sorted and duplicates are then removed. This gives us the size of the removed list without duplicates,.

・ the FIC0 and FIC1 lists of infected cells are examined and a mapping is set up between the address of the infected cells data and the cube address the infected cell reside in.

・ the number of FIC0 cells that are upregulated at this time step is stored in; similarly, the number of newly upregulated FIC1 cells is stored in.

・ FIC0 infected cells are upregulated. The infected cells that live in upregulated cubes must have their avidity values and other parameters reset. As we loop through all the FIC0 cells, if they are in an upregulated cube, we update the avidity value by multiplying the current avidity value by the upregulation factor. If this exceeds the maximum allowable amount, the avidity factor is set to the maximum.

・ FIC1 infected cells are upregulated in the same fashion.

・ the amount of collateral damage is then estimated as. Recall is the number of total new infections. The total number of new T cell triggered deaths is the sum new_FIC0_kills new_FIC1_kills. We can then find the ratio for this coarse cube. If this ratio is larger than, we reset it to. Here, the MHC-I upregulation level stored as. We have computed the’s for each coarse cube for different choices of. For our damage estimate, choose the

values corresponding to the value of we have. In addition, we randomly perturb the

using the parameter as follows: where is a random number in

. Finally, the variable, Update Reg [k], stores the number of new IFN- mediated upregulations for this time interval for the coarse cube. If is the size of a coarse cube (here), then the ratio

gives the fraction of cells in each coarse cube which are newly upregulated. For

each coarse cube, , we can then calculate where, is the number of

cells we estimate are upregulated per IFN- signal (here). This gives an estimate of the number of

cells which are lost to collateral damage. Then gives the total collateral damage in this time step.

For typical simulation values, for (i.e. % of the newly infected cells are killed) and (i.e. % of the cells in a coarse cube are upregulated, we have approximately or so that. However, this is a dynamic computation which depends on what is happening currently. The collateral damage at this time step is thus stored in.

In summary, we scale the IFN- factor for infected cells in upregulated coarse cubes. We can think of these cube addresses as stored in the variables and. We upregulate by looping over all the addresses in and as described above. The removal of FIC0 cells is done in the function which returns the number of ruptured FIC0 cells in, the number of T Cell mediated lytic events in and upregulation addresses in. This is written mathematically as

which is Equation (14). Similar calculations are carried out for

the FIC1 case using in the function which returns the number of ruptured FIC1 cells in

, the number of T cell mediated lytic events in and upregulation addresses in,

Equation (15). The upregulation function then calculates which is written mathematically

as, (Equation (16). In a similar fashion, the upregulation function

calculates, , Equation (17). We also remove cells lysed both by T cells and virus

infections alone from our master FIC0 list, , to generate a new.

(16)

(17)

Cells that are removed due to virus infection only, simply release virus into the extracellular environment of the host. So for these removed cells, virus released from these cells must be added to the total virus present. This amount of new virus added due to the death of FIC0 cells is the variable. We determine how much virus is released at this time step by multiplying by the number of removed cells by a random perturbation of the base amount. Where infected target cells are lysed by T cell clones before the virus matures, infectious progeny virus is not released. At the start of this time step, the size of the FIC0 list is. So, since is the total number of FIC0 cells, we subtract both the number of cells that die naturally due to virus infection and the cells lysed by T cells to get the current value. The equation needed to do this is

which is Equation (19). A similar set of computations is used to

remove virus and T cell-lysed FIC1 cells. However, there is a difference here. The virus grows in FIC1 cells faster by a factor of. This is done in the update equation we discussed earlier using the value computed with the equation from the previous time step expressed mathematically

, which is Equation (20). We then update the FIC1 population using

Equation (21). Then since is an estimate of the number of

infected cells recognized at this time step, we calculate its updated value using the equation

as shown in Equation (22).

(18)

(19)

(20)

(21)

(22)

When infected cells are recognized, T cells undergo clonal expansion which improves the T cell killing percentage. Hence, it seems reasonable to allow the parameter to be reset each time step. To model clonal expansion, we keep track of the fraction of new T cells using the ratio defined by

(23)

The parameter is then reset where we also set up a ceiling threshold which can not go past,

. We update with. If the T Cells which have spread avidity have

been cloned, then there is a concomitant B cell clonal expansion which increases the probability that free virus will be neutralized. This probability is stored in the variable. To implement this idea, we will update as

follows: calculate and then do the reset where we make

sure we do not exceed a specified maximum. Finally, we look at the Uninfected Cell population dynamics: uninfected cells at next time step old uninfected cells uninfected cells homeostasis update new infected cells cells lost due to T cell lysis of uninfected cells, i.e. cells lost due to collateral damage. We

assume the uninfected cells follow a logistics growth model in the absence of infection, ,

where the values of the growth factor and the resource limitation are chosen appropriately. We thus generate Equation (25) which is our estimate of healthy cells in the simulation model which uses our collateral damage estimate from Equation (24).

(24)

(25)

6. Damage Due to the Decoy Hypothesis

We are now in a position to explain the collateral damage due to the decoy model. In addition, it is known that there have been puzzling results reported in survival experiments for WNV infections. Recall, the amount of virus involved in an infection is measured in plaque forming units (pfu). This determines the concentration of infectious virus by virtue of the number of areas of cell death in a cell monolayer in vitro. Our simulations use a parameter in our simulations for the pfu level and, of course, it is difficult to calibrate artificial pfu levels to measured data levels as the pfu measure itself is a large scale phenomenon and so it is complicated to model. A typical survival simulation generates the data shown in Table 5 for an upregulation level of. We model host infections in groups using initial viral concentrations ranging from to pfu. Note there is

Table 5. Sample simulation data.

Figure 2. The percentage of uninfected cells vs. viral infection level.

upward movement in the healthy cell ratio even as the pfu level increases which is an indication that the collateral damage model we have discussed here due to the decoy model is a useful explanatory tool. We can also plot the average uninfected cell percentage vs the logarithm of virus concentration (pfu) in Figure 2. The spikes in the numbers of surviving hosts with increasing inoculating virus concentration indicate that our simulation validates what we would expect to happen if the decoy model holds true.

7. Conclusion

We show that the decoy hypothesis is a reasonable way to explain collateral damage. Our simulations also suggest that the decoy hypothesis might provide an explanation for survival curve data measured in WNV infections which show an increase in survivability even with increasing viral dose. We will explore that further in other work.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Abbas, A.K., Lichtman, A.H. and Pillai, S. (2010) Cellular and Molecular Immunology. Saunders Elsevier, Philadelphia.
[2] King, N.J.C. and Kesson, A.M. (1988) Interferon-Independent Increases in Class I Major Histocompatibility Complex Antigen Expression Follow Flavivirus Infection. Journal of General Virology, 69, 2535-2543.
http://dx.doi.org/10.1099/0022-1317-69-10-2535
[3] Douglas, D.W., Kesson, A.M. and King, N.J.C. (1994) CTL Recognition of West Nile Virus-Infected Fibroblasts Is Cell Cycle Dependent and Is Associated with Virus-Induced Increases in Class I MHC Antigen Expression. Immunology, 82, 561-570.
[4] Kesson, A.M., Cheng, Y. and King, N.J.C. (2002) Regulation of Immune Recognition Molecules by Flavivirus, West Nile. Viral Immunology, 15, 273-283.
http://dx.doi.org/10.1089/08828240260066224
[5] Müllbacher, A., Hill, A.B., Blanden, R.V., Cowden, W.B., King, N.J.C. and Hla, R.T. (1991) Alloreactive Cytotoxic T Cells Recognize MHC Class I Antigen without Peptide Specificity. Journal of Immunology, 147, 1765-1772.
[6] King, N.J.C., Mullbacher, A., Tian, L., Rodger, J.C., Lidbury, B. and Hla, R.T. (1993) West Nile Virus Infection Induces Susceptibility of in Vitro Outgrown Murine Blastocysts to Specific Lysis by Paternally Directed Allo-Immune and Virus-Immune Cytotoxic T Cells. Journal of Reproductive Immunology, 23, 131-144.
http://dx.doi.org/10.1016/0165-0378(93)90003-Z
[7] King, N.J.K., Davison, A., Getts, D., Ping Lu, D., Teague Getts, M., Yeung, A., Peterson, J. and Kesson, A.M. (2008) Enhanced Antigen Processing or Immune Evasion? West Nile Virus and the Induction of Immune Recognition Molecules. In: Diamond, M.S., Ed., West Nile Encephalitis Virus Infection: Viral Pathogenesis and the Host Immune Response, Emerging Infections in the 21st Century, Springer-Verlag, Heidelberg, 309-339.
[8] Kuhlman, P., Moy, V.T., Lollo, B.A. and Brian, A.A. (1991) The Accessory Function of Murine Intercellular Adhesion Molecule-1 in T Lymphocyte Activation. Contributions of Adhesion and Co-Activation. Journal of Immunology, 146, 1773-1782.
[9] Shen, J., T-To, S.S., Schrieber, L. and King, N.J.C. (1997) Early E-Selectin and VCAM-1 and ICAM-1 and Late Major Histocompatibility Complex Antigen Induction on Human Endothelial Cells by Flavivirus and Comodulation of Adhesion Molecule Expression by Immune Cytokines. Journal of Virology, 71, 9323-9332.
[10] Getts, D.R., Matsumoto, I., Muller, M., Getts, M.T., Radford, J., Shrestha, B., Campbell, I.L. and King, N.J.C. (2007) Role of IFN-γ in an Experimental Murine Model of West Nile Virus-Induced Seizures. Journal of Neurochemistry, 103, 1019-1030.
http://dx.doi.org/10.1111/j.1471-4159.2007.04798.x
[11] Peterson, J.K., King, N.J.C. and Kesson, A.M. (2014) Modeling West Nile Virus One Host Infections. Technical Report, Clemson University, Clemson.
http://www.ces.clemson.edu/%7Epetersj/CurrentPapers/WNVSimulationCode-04082014.pdf
[12] Alon, U. (2006) An Introduction to Systems Biology: Design Principles of Biological Circuits. CRC Mathematical and Computational Biology, Chapman Hill.
[13] King, N.J.C. and Kesson, A.M. (2003) Interaction of Flaviviruses with Cells of the Vertebrate Host and Decoy of the Immune Response. Immunology and Cell Biology, 81, 207-216.
http://dx.doi.org/10.1046/j.1440-1711.2003.01167.x
[14] Lobigs, M., Mullbacher, A. and Regner, M. (2003) MHC Class I Up-Regulation by Flaviviruses: Immune Interaction with Unknown Advantage to Host or Pathogen. Immunology and Cell Biology, 81, 217-223.
http://dx.doi.org/10.1046/j.1440-1711.2003.01161.x

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.