Skip to main content

Erratum to: Design and pilot validation of A-gear: a novel wearable dynamic arm support

The Original Article was published on 18 September 2015

Unfortunately, the original version of this article [1] contained an error. Equation 6 was included incorrectly: in the original equation variable slinks3 was missing.

The correct Equation 6 can be found below:

$$ {s}_3=\frac{m_{FA}\cdot {s}_{FA}+{m}_{link3}\cdot {s}_{link3}}{m_3} $$

References

  1. Kooren PN, Dunning AG, Janssen MM, Lobo-Prat J, Koopman BF, Paalman MI, et al. Design and pilot validation of A-gear: a novel wearable dynamic arm support. J Neuroeng Rehabil. 2015;12:83.

    Article  PubMed Central  PubMed  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Peter N. Kooren.

Additional information

The online version of the original article can be found under doi:10.1186/s12984-015-0072-y.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kooren, P.N., Dunning, A.G., Janssen, M.M.H.P. et al. Erratum to: Design and pilot validation of A-gear: a novel wearable dynamic arm support. J NeuroEngineering Rehabil 12, 111 (2015). https://doi.org/10.1186/s12984-015-0106-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12984-015-0106-5